USA - Vacuum pumps and components Advertising        select a Zip Code:     ZIP 0     ZIP 1     ZIP 2     ZIP 3     ZIP 4     ZIP 5     ZIP 6     ZIP 7     ZIP 8     ZIP 9     or an   area code Angstrom Sciences, Inc. - www.angstromsciences.com - 10984 Lynne Ave, Lafayette, CO, USA email: info@angstromsciences.com, Tel. +1 412-469-8466 Angstrom Sciences' Colorado office provides consultative services, sales advice, and technical support on the company's high performance magnetron sputter sources and high purity pvd materials for a wide variety of thin film sputter application processes. The company's patented advancements in magnet technology and cathode design provide high target utilization and deposition rates without compromising process film uniformity. Backing Plates and Bonding Services, Conductive Products, Thin Film Coating Lab Services. products:   Magnetron sputter sources and high purity pvd materials Circular Magnetrons, Linear Magnetrons, Rotary Magnetrons, Cylindrical Magnetrons, Custom Magnetrons and Cluster Assemblies, Magnet Retrofits for BOC, MRC, CVC, Leybold, Perkin Elmer, and Cylindrical Assemblies, High Purity PVD Materials and Sputtering Targets, WINTEK Corporation - www.wintek-corp.com - 230 State Hwy 206, Bldg.4, NJ 07836 Flanders, USA Paul Winter, email: paul@wintek-corp.com, Tel. +1 (973) 252 8200 Wintek has extensive experience in applications requiring vacuum in process industries including the chemical, environmental, food, pharmaceutical and plastics industries. We review your application and requirements, and explain the advantages and/or disadvantages of each type of vacuum pump so that you can understand our recommendation. Our focus is on vacuum pump reliability in your application at a reasonable cost. products:   Vacuum Pumps and Systems Solvent Recovery Vacuum Systems, Vapor recovery vacuum systems, Boosted (high vacuum) liquid ring vacuum systems, Steam jet / liquid ring hybrid vacuum systems, Oil lubricated rotary vane vacuum pumps, Once-thru-oil (OTO) vane vacuum pumps, Dry Vacuum pumps. FRIATEC N.A Engineered Products - www.rheinhuette.de - 11108 Challenger Avenue, Suite 1, Odessa, FL 33556, USA J. Kelly, email: jkelly@friatecna.net, Tel. +1 727-753-0880 products:   Liquid ring vacuum pump in engineering ceramic Parts in contact with the medium made of FRIKORUND silicate ceramic material, impeller also in titanium, Hastelloy, zirconium or glass fibre reinforced PTFE. Frame casing GGG 40.3, complete vacuum systems (system solutions). Area of application: Corrosive and abrasive gases and vapours in the chemical and pharmaceutical industries. Suction capacity up to 600 m3/h (vacuum or compressor operation). In vacuum service these pumps are normally capable of suction pressures up to 100 mbar. Combined with an auxiliary ceramic gas jet pump up to 30 mbar can be achieved. Sierra Applied Sciences - www.sierraapplied.com - 5441 Western Avenue, Boulder, Colorado 80301, USA email: info@sierraapplied.com, Tel. +1 303.440.0861 Sierra Applied Sciences was founded in 1989 by our current President and C.T.O., Barry Manley. Today the company is the world leader in thin-film sputtering technology. With our cathodes and engineering support, we help customers design, develop and produce products for all sputtering applications. products:   cathodes Sierra Applied Sciences works through simple design and innovative concepts to provide customers with reliable cathodes for a variety of systems including Photo Voltaic's for Solar, CD's, Optical Filters, Flat Panel Displays, Magnetic Media and Heads, Plastic Films, Architectural Glass and more. We have achieved greater than 45% target utilization by employing our patented design (U.S. Pat. #5,262,028). When Sierra cathodes are installed in existing customer chambers, customers experience the performance improvements we promise, and guarantee. Sierra Applied Sciences offers a "Pre-Purchase Performance Guarantee". Round cathodes: from 2" to 12" with internal or flange mountings. Rectangular Cathodes: with target widths of 2" to 11" and lengths up to 140". Magnetic targets: the most difficult challenge for utilization in the sputtering industry. Cathodes for sputtering non-magnetic materials. NASH, Gardner Denver Liquid Ring Pump Division - www.GardnerDenverNash.com - 9 Trefoil Drive, 06611-1330 Trumbull, Connecticut, USA email: nash@gardnerdenver.com, Tel. +1 (203) 459 3900, Toll-Free +1 877 275 NASH Gardner Denver Nash was created in September of 2004 when Gardner Denver acquired nash_elmo Industries from Audax. nash_elmo resulted from the 2002 merger of The Nash Engineering Company, USA, and elmo vacuum technology GmbH, Germany, formerly a Siemens subsidiary. Today as NASH, Gardner Denver Liquid Ring Pump Division, we provide improved global service and technical support for liquid ring vacuum pumps, compressors and engineered systems through our technical centers, manufacturing plants and service centers strategically located around the world. products:   liquid ring vacuum pumps Gardner Denver Nash provides liquid ring vacuum pumps, dry pumps, gas compressors and ejectors for the Pulp & Paper Industry, Chemical Industry, and the Power Industry. KNF Neuberger, Inc. - www.knf.com - Two Black Forest Road, Trenton, NJ 08691-1810, USA email: knfusa@knf.com, Tel. +1 (609) 890 8600 KNF Neuberger, Inc., based in the Trenton, NJ area since 1977, designs and manufactures standard and custom-tailored air, gas and liquid diaphragm pumps for the USA, Canada and Mexico markets. The company's broad range of products support a wide variety of applications,either as a vital part of an OEM (original equipment manufacturer) instrument, or as a stand-alone laboratory appliance. KNF is a pioneer in the use of PTFE materials for pumps that handle aggressive gases or liquids, and holds over 300 patents; clearly the world leader in diaphragm pump innovation. products:   Laboratory pumps, Diaphragm vacuum pumps, vacuum systems: consisting of a KNF Pump, Stand and Programmable Pump Controller. Air Dimensions Inc. - www.airdimensions.com - 1371 West Newport Center Drive, Suite 101, Deerfield Beach, Florida 33442, USA email: info@airdimensions.com Toll free USA (800) 650-3267, Tel. +1 (954) 428-7333 Air Dimensions Inc. founded in 1971 on the principal of providing our customers with the highest quality pumps in the industry along with superior customer service. ADI's Dia-Vac® vacuum pumps have a proven track record of long life under the most adverse operating conditions. products:   diaphragm vacuum pumps ADI's complete line of Dia-Vac® diaphragm vacuum pumps offers 100% oil-free, contamination free and leak free sampling. Dekker Vacuum Technologies, Inc. - www.dekkervacuum.com - 935 South Woodland Avenue, Michigan City, IN 46360-5627, USA email: sales@dekkervacuum.com Tel. +1 219 861-0661 , Service Tel. +1 888 925-5444 Dekker Vacuum Technologies, Inc. is a privately held corporation located in Northwest Indiana, operating in a 45,000 square foot manufacturing, distribution and warehouse facility in Michigan City. products: TiTAN series single-stage and two-stage liquid ring vacuum pumps, DuraVane lubricated and oil-free (dry) rotary vane pumps, DuraVane and Rota-Torr high vacuum pumps, Vmax oil-sealed liquid ring vacuum pump systems, AquaSeal water-sealed liquid ring vacuum pump systems, ChemSeal liquid ring vacuum pump systems for solvent recovery and the DuraVane vacuum pump systems. DVT specializes in custom-engineered systems for any application. GAMMA Vacuum, LLC - www.gammavacuum.com - 2915 133rd Street West, Shakopee, MN 55379, USA Tony Wynohrade, email: tony.wynohrad@gammavacuum.com Tel. +1 952 445 4841 Gamma Vacuum is a global technology firm that designs, manufactures, and services ultra-high vacuum components for a variety of instrumentation and high energy physics applications. Gamma Vacuum acquired the technology for ion pumps and their controls from Physical Electronics in May of 2003. The technology was originally grown from Ultek in the 1970's and expanded under the Perkin Elmer name into the 1990's. The rich history of innovation and leadership in the development of ultra-clean UHV environments continues through the experience within Gamma Vacuum. The employees of Gamma Vacuum have over 130 years of combined manufacturing, engineering, and leadership skills in the ultra-high vacuum industry. products:   Ion Pumps We Manufacture Ion Pumps for UHV Applications: TiTan™ Variable Element Ion Pumps, TSP and NEG BoostiVac™, DIGITEL™ Ion Pump Controllers. Metallurgical High Vacuum Corporation - www.methivac.com - 6708 124th Avenue, Fennville, MI 49408, USA Geoff Humberstone, President, email: sales@methivac.com Tel. +1 (269) 543-4291, Toll free 877-787-9880 Metallurgical High Vacuum Corp., a remanufacturer of vacuum process equipment, was founded in Holland, Michigan, in 1981 by Geoff Humberstone as a consulting business, selling engineering expertise to the high-vacuum industry. The business was expanded in 1985 to provide in-depth service, design, and engineering on a wide range of high-vacuum equipment, including re-building of vacuum, booster, and diffusion pumps and blowers. products:   New and rebuilt high vacuum pumps and blowers, Design and manufacturing of high vacuum systems, Replacement parts, Rebuilding, Part Remanufacturing of older pumps and systems vacuum piping and manifolds, flexible connectors, vacuum valves, custom oil filtration systems, helium leak testing, field repair. Rental pumps and blowers are also available. VACC, LLC - www.vacclimited.com - 3748 Via Baldona, Oceanside CA 92056, USA Peter LUKENS, email: info@vacclimited.com Tel. +1 650-906-4912 VACC Limited is a full service engineering and consulting firm specializing in the design and development of state of the art vacuum and cryogenic hardware and processes for the world-wide technology market. Expert design assistance and state of the art vacuum system modeling is also available in collaboration with your product development team. products:   Turn-key Rough, High and UHV vacuum systems RGA based vacuum bake stations Diverse leak detection solutions Closed cycle cryostats and cryogenic systems NES COMPANY INC. - www.nescompany.com - 339 Changebridge Rd Ste 1B, Pine Brook, NJ 07058, USA Jared SANDMAN, email: info@nescompany.com Tel. +1 973-795-1519 Originally founded in 1993 by a group of NASH engineers as North Eastern Services, LLC, NES Company has a legacy of engineering expertise developed over decades of experience with NASH vacuum equipment. NES offers one of the largest selection of new and remanufactured liquid ring vacuum pumps with capacities from 10CFM up to 23,000CFM. We can design and build custom systems to serve a huge range of applications. products:   liquid ring vacuum pumps NASH liquid ring vacuum pumps, Tuthill vacuum pumps central vacuum systems, custom vacuum packages, remanufactured NASH vacuum pumps. BellowsTech, LLC - www.bellowstech.com - 1289 N. US Highway 1, Ste. #1, Ormond Beach, FL 32174, USA email: bellows@bellowstech.com, Tel. +1 386 615-7530 BellowsTech, LLC is a manufacturer of edge welded bellows for Ultra High Vacuum (UHV) and positive pressure applications. Using proprietary welding technology, ISO 9001:2008 quality management system, and design expertise, BellowsTech produces some of the world's most sophisticated edge welded bellows assemblies. Edge welded bellows are available in AM350, stainless steel, titanium, Hastelloy, and Inconel materials. products:   Edge Welded Bellows and Bellows Assemblies OD's from 0.3 to 26 inches (7.6 mm to 660 mm) ID's from .15 to 25.5 inches (3.8 mm to 648 mm) Lengths up to 96 inches (244 cm). Materials range from .002 inch to .036 (.05 mm to .91 mm) in thickness and include Titanium, 316LSS, AM350 SS, Aluminum and Inconel/Hastelloy. Custom metal and precision prototype manufacturing fabrication are also available. Trillium SubFab Services - www.trilliumsubfab.com - 13011 SE Jennifer Street STE 204, Clackamas, OR 97015, USA Rob Breisch, Vice President, Business Development email: robertb@trilliumsubfab.com Tel. +1 503-682-3837, direct 801-416-0827, mobile 801-726-5035 Trillium SubFab Services, Inc. was established in 2002 in Wilsonville, Oregon. We recently moved to our new 31,000 square foot World Class facility in Clackamas, Oregon. products:   Semiconductor Vacuum Pump and Peripherals Service & Repair Customized On-Site Service Contracts Refurbishment / Exchange Services Expertise in multiple makes/models of dry pumps, boosters, wet pumps, chillers, and abatement equipment Turn times of 15 days or less - Free local pickup and delivery in the Portland, OR area - Largest inventory of exchange pumps in the US Customized service and support programs based upon customer needs MEWASA North America Inc. - www.mewasa.ch - 12841 N. Bloomington Loop, AZ 85755 Oro Valley, USA Ira Miller, email i.miller@mewasa.ch, Tel. 520-797-6980 MEWASA North America, Inc. is an affiliate corporation of MEWASA A.G. - a Swiss Manufacturer (ISO 9001) of Precision Edge Welded Bellows, Metal Bellows Components and Bellows Sub - Assemblies. MEWASA is a highest quality manufacturer of edge welded metal bellows for 15 years to the following industries: Synchrotrons, Accelerators, Semi Conductor and related Nanotech Industries as well as Ultra High Vacuum OEM's & High Vacuum OEM's. products:   Edge Welded Bellows Development, manufacturing and distribution of a large range of bellows and complete bellows assemblies. PLANSEE USA LLC - www.plansee.com - 115 Constitution Boulevard, Franklin, MA 02038, USA email: usa@plansee.com, Tel. +1 (508) 553-3800 With its complete in-house manufacturing, extensive expertise in powder metallurgy and special deformation technologies, PLANSEE guarantees the best quality materials for the coating industry. They stand out for their full density, high purity and a uniform and fine grained microstructure. PLANSEE has established facilities in 16 countries. Products: Sputtering Targets PLANSEE is a leading supplier of planar and rotary sputtering targets for thin-film solar cells (CIGS, CdTe, CSP), flat panel displays and hard coating. In addition to sputtering targets made of pure molybdenum and tungsten, PLANSEE also offers high quality molybdenum alloys such as MoNa, chromium, and materials for absorber layers, as well as substrates for flexible solar cells. For hard coating PLANSEE delivers all typical OEM target dimensions in many compositions such as TiAl, Ti, TiSi, Cr, TiB2 or binder free WC. In its in-house application center, PLANSEE sputters and characterizes thin-film materials under real conditions. The laboratory is also available for customers. According to their specifications, PLANSEE sputters test substrates by RF-, DC- or Pulsed-DC-methods and thereby gives decisive information for the further development of coating systems. CIJR, Inc. dba Jensen Engineering - www.cijr-jensenengineering.com - 2252 US Highway 78 W, Ste A, 30052 Loganville, GA, USA Connie Rodgers, email: cijr@bellsouth.net, Service Tel. 800-554-3841 In business since 1984, we repair all brands of mechanical vacuum pumps and boosters products:   Service & Repair SOLID SEALING TECHNOLOGY - www.solidsealing.com - 44 Dalliba Ave, 12189 Watervliet, USA Amy LeBlanc, email: aleblanc@solidsealing.com, Tel. +1 518-266-6017 At Solid Sealing Technology, we utilize the latest equipment and processes to join advanced materials including: metalizing of ceramics, high temperature brazing, glass-ceramic sealing, welding, and critical mechanical assembly. products:   feedthroughs, connectors and custom assemblies Whether you are a distributor looking for industry standard feedthroughs and connectors, or an O.E.M. that requires a custom assembly, SST takes pride in engineering and manufacturing to your specific needs. Republic Blower Systems - www.republicsales.com - 5131 Cash Rd., 75247 Dallas, USA Zach GOFF, email: amber@republicsales.com, Tel. (214) 631-8070 Republic Blower Systems has been in business since 1962 and manufacture Centrifugal Blowers, Regenerative Blowers and Airknife Drying Systems. Republic distributes positive displacement blowers (Roots), Rietschle Vacuum Pumps, Mann+ Hummel Filters. products:   positive displacement blowers, Regenerative Blowers VECOR - www.vecorus.com - 101 Duranzo Aisle, Irvine CA 92606, USA Vladimir CHUTKO, email: info@vecorus.com, Tel. +1 949-394-4466 products:   coating and vacuum equipment and components (coating machines, DC magnetron sputtering systems, ion sources, power supplies, controllers, etc.) vacuum engineering software, optical components, and also provides high quality consulting, engineering and equipment upgrade service. THERMAL CONDUCTIVE BONDING, INC. - www.tcbonding.com - 1430 Tully Road, 95122 San Jose, USA Jacques MATTEAU, email: jmatteau@tcbonding.com, Tel. 408-920-0255 Thermal Conductive Bonding, Inc.: Since 1998 TCB has offered high quality bonding services for the high technology communities. Having successfully developed proprietary bonding techniques that uniquely address issues relating to assemblies such as sputtering targets, Electrostatic Chucks, and Gas Dispenser Plates, TCB has had a focus on the thin film and semiconductor community. With many decades of solid experience in joining materials TCB continues to explorer diverse applications that would have us expand on where our techniques and bonding materials can be used. products:   Precision Bonding Services Indium Bonding, Elastomer Bonding, Custom Sputter Coating A Affordable Blowers & Pumps - www.blowers-pumps.com - 9200 Popes Creek Court, 75071 McKinney, Texas, USA Peter ELLINGTON, email: pellington@petes-carpet.com Tel. 214-578-9533 A Affordable Blowers and pumps is a wholesale supplier of Tuthill Vacuum Blowers, CAT Pumps and Kohler Engines. products:   Competitor® Blowers are designed to be compatible with existing OEM dimensions, and also provide features previously available only on premium-priced blowers, such as full splash lubrication, and low-noise options. Equalizer® Blowers also include special features usually found only on premium blowers, but at competitive prices. They are high flow, compact blowers in popular 4.5" and 6" gear diameters. PD Plus® Blowers are our long-established line of premium, heavy-duty blowers. PD Plus Blowers are renowned for their quality, dependability and outstanding performance. Also available in special materials such as stainless steel, carbon steel, plated iron and aluminum.     Keywords     www.vacuum-guide.com