| vacuum pumps manufacturers and suppliers in the states of Alabama, Florida, Georgia, Mississippi and Tennessee |
| USA entry page or select a Zip Code: ZIP 0 ZIP 1 ZIP 2 ZIP 3 ZIP 4 ZIP 5 ZIP 6 ZIP 7 ZIP 8 ZIP 9 or an area code. |
Friatec-Rheinhutte Pumps & Valves, LLC - www.rheinhuette.de - 11108 Challenger Avenue, Suite 1, Odessa, FL 33556, USA
J. Kelly, E-Mail: jkelly@friatecna.net, Tel. +1 727-753-0880, Fax +1 727-753-0886 products: Liquid ring vacuum pump in engineering ceramic (Parts in contact with the medium made of FRIKORUND silicate ceramic material, impeller also in titanium, Hastelloy, zirconium or glass fibre reinforced PTFE. Frame casing GGG 40.3), complete vacuum systems (system solutions). Area of application: Corrosive and abrasive gases and vapours in the chemical and pharmaceutical industries. Suction capacity up to 600 m3/h (vacuum or compressor operation). In vacuum service these pumps are normally capable of suction pressures up to 100 mbar. Combined with an auxiliary ceramic gas jet pump up to 30 mbar can be achieved. In compressor service this pump can be used up to 2 bar. |
Air Dimensions Inc. - www.airdimensions.com - 1371 West Newport Center Drive, Suite 101, Deerfield Beach, Florida 33442, USA
E-Mail: info@airdimensions.com, Toll free USA (800) 650-3267, Tel. +1 (954) 428-7333, Fax +1 (954) 360-0987 products: ADI's complete line of Dia-Vac® diaphragm vacuum pumps offers 100% oil-free, contamination free and leak free sampling. company profile: Air Dimensions Inc. founded in 1971 on the principal of providing our customers with the highest quality pumps in the industry along with superior customer service. ADI's Dia-Vac® vacuum pumps have a proven track record of long life under the most adverse operating conditions. |
CIJR, Inc. dba Jensen Engineering - www.cijr-jensenengineering.com - 2252 US Highway 78 W, Ste A, 30052 Loganville, GA, USA
Connie Rodgers, E-Mail: cijr@bellsouth.net, Service Tel. 800-554-3841
company profile:
In business since 1984, we repair all brands of mechanical vacuum pumps and boosters
BUSCH, Inc. - 2985 Gordy Parkway, Suite 202, Marietta, GA 30066-3078, USA
E-Mail: , Tel. , Fax
contacts:
Trevor Willbur, Regional Manager (AL,FL,GA),
products:
Vacuum Technology, Vacuum Pumps & Systems,
- Oil Recirculating rotary vane vacuum pumps (R5 series up to 1600 m³/h),
- screw vacuum pumps (Cobra up to 2700 m³/h),
- rotary piston vacuum pumps and compressors (Mink up to 500m³/h),
- Once-Through-Sealing rotary vane vacuum pumps(Huckepack bis 760 m3/h),
- dry vacuum pumps (Seco bis 250 m³/h),
- side channel blowers (Gazelle, Samos up to 1100 m³/h),
- liquid ring vacuum pump (Dolphin up to 435 ³/h),
- Scroll vacuum pumps (Fossa up to 30 m³/h),
- Roots blowers (Puma / Panda up to 8000m³/h, - Dingo/Cat/Panther up to 3120 m3/h),
- Turbomolecular vacuum pumps,
- Service and Repair
- accessories
company profile:
Since the foundation of BUSCH in 1963 in Germany, the company policy has always been customer oriented, supplying high quality and competitively priced products, as well as excellent technical support and service backup. BUSCH now has five manufacturing plants and a total of 33 BUSCH companies serving customers throughout the world. The BUSCH manufacturing facilities are certified to ISO 9001
PREMIER PUMPS PRIVATE LIMITED - 1108 Park Lake Lane, Norcross, GA 30092, USA
E-Mail: , Tel. , Fax
products:
liquid ring vacuum pumps
Vacuum Pumps manufactured by Premier Pumps are functionally and dimensionally equivalent to Nash CL series Vacuum Pumps. We are presently manufacturing Vacuum Pumps equivalent to Nash CL-400, CL-700, CL-1000, CL-2000,CL-3000, CL-4000, CL-6000, CL-9000.
Schoonover, Inc. - 222 Riverstone Drive, Canton, GA 30114, USA
E-Mail: , Tel. , Fax
products:
- Vacuum Pumps: Rotary Vane, Rotary Piston, Roots Type, Turbomolecular, Diaphragm, Oil Diffusion, Oil-Free Pump Packages, Polycold Refrigeration Systems, Cryopumps
- Valves, Flanges and Fittings, Custom Fabrication
- Leak Detection: Helium Leak Detectors, Helium Sniffers, Halogen Leak Detectors
- Vacuum Gauges: Sky Ceramic Capacitance Diaphragm Gauge, Bayard-Alpert Pirani Gauge, Bayard-Alpert Gauge, Pirani Standard Gauge, Penning Gauge, Gauge Controller, Special Applications
- Electron Beam Equipment: Ferrotec Electron Beam Equipment
- Thin Film Deposition Controllers: Quartz Crystal, Electron Impact Emission Spectroscopy
- Ferrofluidic Feedthroughs: Ferroetec Ferrofluidic Feedthroughs
- Binary Gas Controller: Acoustic Transducer
- Residual Gas Analysis: Open Ion Source, Closed Ion Source, Extended Pressure Range, Pressure Conversion Systems
company profile:
Schoonover, Inc. represents leading manufacturers of High Vacuum Equipment, High Temperature Furnaces, and Liquid Filtration Equipment in the Southeast to provide engineering solutions and products to meet your research and production requirements.
United Blower, Inc. - 1198 Airport Rd., Ball Ground, GA 30107, USA
E-Mail: , Tel. , Fax
company profile:
United Blower, Inc. utilizes blowers from reputable manufactures such as: MD Pneumatics, Blower Engineering, and HSI (Blowers).
JB Systems - 1334 Greenville Road, LaGrange, GA 30241, USA
Carol Gaston, E-Mail, Tel. Fax
company profile:
Tuthill Vacuum sales representative for Alabama, Tennessee, and Georgia
Gardner Denver Blower Div. - 100 Gardner Park, Peachtree City, GA 30269, USA
E-Mail: , Tel. , Fax
Products:
Centrifugal and Positive Displacement Blowers, Exhausters and Vacuum Pumps up to 43,000 CFM.
Brands Manufactured include Sutorbilt, DuroFlow, CycloBlower, Lamson, TurboTron, Wittig and AeroFlow
E.W. KLEIN & COMPANY - 314 W. Wieuca Road, NE, Atlanta, Georgia 30342, USA
E-Mail, Tel. Fax
Products:
NASH and SIEMENS vacuum pumps and compressors
Special duty pumps and mixers
Service and Repair
company profile:
We specialize in NASH pumps, the industry leader in liquid ring vacuum technology. Our experienced team understands mechanical process equipment.
We provide unparalleled service for critical applications by representing rugged, reliable vacuum pumps and other world class special duty pumps and process equipment. Some of the most trusted names in the industry can be found in who we proudly represent: Gardner Denver Nash, American LEWA, Corcoran Company, Dorr-Oliver, Weatherford, Weir Slurry Group, Warman, Ash Pump, Hazleton, Galigher, Filtertech, Sizetec, APV Heat Transfer, Vanec, R.P. Adams
Vacuum Pump Systems, Inc. - P.O. Box 1826, GA 30503 Gainesville, USA
E-Mail: , Tel. , Fax
products:
New Vooner Vane Guard Pumps, Rebuilt Nash Vacuum Pumps, Dekker Aqua-Seal, Dekker Oil-Seal Systems, Dekker Bare Pumps
company profile:
new and rebuilt liquid ring pump packages for the poultry industry
Travaini Pumps USA (South East) - 565 Underwood Drive, Jefferson, GA 30549, USA
E-Mail: , Tel. , Fax , Tel.
products:
company profile:
MAT-VAC Technology - P.O. Box 2299, Daytona Beach, FL 32115-2299, USA
E-Mail:
products:
Thin Film Deposition Systems: PVD System Modernization Upgrades, Sputtering Systems, Evaporation Systems, Custom Designed Equipment.
Thin Film Coating Services, Thin Film Deposition Materials, Backing plates and Target bonding, Crucible Liners
Reverse Engineering / Repair Services.
company profile:
Since 1993, we have developed the reputation of filling special and exotic material requirements. Unlike other high purity materials suppliers, MAT-VAC is also a world class manufacturer of Sputtering and Evaporation systems and related accessories. This, combined with our expertise in thin film coatings, gives MAT-VAC an added degree of expertise when it comes to thin films and their applications.
AN Corporation Headquarters - 707 Southwest 19th Avenue, Williston, FL 32696, USA
Dana King, Sales Manager, E-Mail:
products:
High Vacuum Valves
Vacuum Feedthroughs
Flanges and Fittings
Glass Components
Leak Detector Accessories,
Vacuum Measurement
Gas and Pump Line Heaters
Custom Fabrication and Chambers
company profile:
A&N Corporation is located in a 40,000 square foot, state-of-the-art manufacturing facility in Williston Florida. A&N staffs over 100 people all committed to the corporate motto: "Striving for perfection… Achieving excellence!" With 40 years of experience, A&N matches the unsurpassed quality of their vacuum components with a high level of customer service rarely seen in this industry.
A&N specializes in the manufacturing, polishing, cleaning, packing, storage and shipping of high and ultra-high vacuum components. A&N produces the highest quality vacuum components for national laboratories, colleges and universities and original equipment manufacturers.
LDS Vacuum Products, Inc. - 773 Big Tree Drive, Longwood, FL 32750, USA
E-Mail: , Tel. , Fax
products:
Calibrated Gas Leaks, Leak Detectors – Buy, – Rent, – Spare Parts
Flanges: Conflat Flanges, ISO (Large Flange), NW Flanges
Gauges – Calibration Services, – New, - Surplus
Pumps – New, – Surplus, – Kits
Traps, Valves
company profile:
LDS also designs and fabricates custom leak detection and vacuum systems, vacuum components and chambers. Quality Vacuum Products for over 30 years.
Consulting for all leak detection and vacuum applications. Leak Detector rentals and on-site leak testing are also available.
Turbo Vacuum - 322 E Central Blvd. Unit 809, Orlando, FL 32801, USA
E-Mail, Tel. Fax
products:
Turbo Vacuum offers a complete range of cutting edge turbo pump products and services.
company profile:
Turbo Vacuum is the first leading company to address the increasing demands of the specific high to ultra-high vacuum industry with products and services. High Vacuum technology today is a niche sector in the industry of vacuum-producing ultimate pressures to 5 x10 -10 or two-billionth of atmospheric pressure. Until now high vacuum was classified as just another segment, grouped into the overall umbrella of the vacuum world.
PFEIFFER Vacuum Inc. - 6237 Bent Pine Dr. #631B, FL 32822 Orlando, USA
Erik Houge, Sales Engineer,
products:
Turbomolecular pump, Rotary vane vacuum pump, Roots pump, Diaphragm pump, Dry pump,
vacuum measurement and control instrument, Mass spectrometer, Residual gas analyzer,
Helium leak detector, vacuum valve, vacuum flange, vacuum fitting, tubing.
Vactek Inc. - 4700 SW 51 Street Suite 204, Fort Lauderdale, FL 33314, USA
E-Mail: , Tel. , Fax
products:
Vactek is a authorized distributor for the following equipment:
BOC Edwards, BOC Stokes Vacuum, Hyvac Products, Leybold Vacuum Products, Orion Pumps, Pfeiffer Vacuum, Tuthill Vacuum / Kinney Vacuum, Varian Vacuum Technologies,Welch Vacuum Technology.
company profile:
We specialize in industrial, analytical and medical vacuum equipment. Vactek is a distributor for various vacuum pump and PD blower manufacturers, we stock spare parts, pump fluids, fittings and,just about any consumable relating to vacuum pumps, blowers and vacuum systems.
Sensidyne, Inc. - 16333 Bay Vista Drive, Clearwater, Florida 33760, USA
E-Mail: , Tel. , Fax , Tel.
products:
Sensidyne micro/miniature diaphragm air pumps are tailor made for use in many Original Equipment Manufacturer applications including medical, automotive, gas sampling, gas analysis and other industrial and commercial applications. We can also customize a pump to meet the needs of your special application.
company profile:
Sensidyne operates from a 25,000-sf manufacturing and office facility in Clearwater, Florida. The Clearwater operation consists of four business groups: Health & Safety, Engineered Systems, OEM Micro Air Pumps and Medical Products.
The OEM Micro Air Pump Group designs, manufactures and sells miniature precision diaphragm air pumps directly to OEMs worldwide.
Sensidyne employs 100 people in the Clearwater operation.
Sensidyne has achieved ISO 9001, EN46001 and ISO 13485 status. Sensidyne is a FDA registered facility.
Jandor Sales - P.O. Box 8826, Lakeland, FL 33806-8826, USA
Bob Janis,
company profile:
Artisan Industries sales representative for Florida (except the Panhandle)
SPECS Scientific Instruments, Inc. - 635 South Orange Avenue, Sarasota, Florida 34236, USA
E-Mail: , Tel. , Fax
products:
STM 150 Aarhus Variable Temperature Scanning Tunneling Microscope
Systems for Surface Analysis
MBE, a complete line of Molecular Beam Epitaxy Components and Systems
UHV Custom Built Vacuum Chambers, Mu-metal Recipient, Liners, UHV Systems and Assemblies
company profile:
SPECS, with over twenty years of experience in the field of Ultra High Vacuum products, is a leading manufacturer and distributor of surface analysis and thin film deposition components and systems for LT-STM, XPS, UPS, ISS, AES, SAM, SEM, LEED, EELS, ARUPS, ARXPS, PEEM, LEEM, SIMS and SNMS, MBE Components, Effusion Cells, K-cells, RF-sources, Plasma Sources, Accelerator Components, Beam-lines for Synchrotron Radiation Facilities, and Monochromators for hard and soft X-rays.
Mustang Vacuum Systems - www.mustangvac.com - 1675 Independence Blvd, Sarasota, FL 34234, USA
Tel. +1 941-377-1440
products:
Sputtering Systems, Evaporation Systems, Tool Coaters, DLC Coaters, Optical Coaters, Roll (Web) Coaters, Custom Coating Systems, Automated Metallizers, Magnetron Sputtering Cathodes, Custom Vacuum Chambers, Vacuum Components, Turnkey Solutions
Mustang is known worldwide for its Colt 48®, a small batch fast-cycle dual-door sputtering machine that incorporates both sputtering and an environmentally friendly topcoating process in a single chamber. The Colt has been enthusiastically received as the fastest, most reliable sputtering machine available.
company profile:
Mustang Vacuum Systems manufactures top quality vacuum coating / metallizing equipment, including sputtering machines, optical coating units, batch metallizers, and roll-to-roll systems.
TECPORT - 6901 TPC Drive Suite 450, 32822 Orlando, FL, USA
Joseph KIM, Email, Tel. Fax
products:
Thin Film Deposition Systems
company profile:
Manufacturer of Vacuum Coating Systems for Precision Optics, Ophthalmic, Flat Panel Display, Imaging, Solar Cell, and Telecommunication applications.
An industry leader in innovation, quality, reliability, software and service. Sophisticated yet user friendly systems employ leading edge technology such as plasma assisted deposition.
Systems are custom built and pre-configured for your process and your volume. Process is pre-configured, and installed systems are production-ready within one week. Onsite service and annual service contracts available.
HighVac Company - 555 West HWY 40, Inglis, Fl 34449, USA
Bob Ghamandi , E-Mail, Tel., Fax
products:
Highvac manufacture and stock a complete line of flanges
- ISO flanges and fittings in accordance with ISO.
- ASA flanges, fittings and hardware.
- conflat type flanges, fittings and hardware.
- nw flanges and fittings in accordance with ISO.
company profile:
Since 2001, we have developed the reputation of filling special and off the shelf vacuum components requirements to companies here in the U.S and Canada. Unlike other high vacuum components suppliers HIGHVAC CO is also a contract machining company for custom machined components and assemblies for the semiconductor, bellows, thinfilm, high vacuum and all related industries
Andress Engineering Associates - www.andressengineering.com - 131 Airpark Industrial Road, Alabaster, Alabama 35007, USA
Rex Gaskey, E-Mail: , Tel. , Fax
products:
Armstrong liquid ring vacuum pumps
Armstrong Pump and Service Company - 6509 Amber Hills Road, Trussville, AL 35173, USA
E-Mail: , Tel. , Fax
products:
Armstrong Pump offer liquid ring vacuum pumps ranging from 100 CFM to 14,000 CFM. Our standard materials of construction are 304SS & 316SS, but unlike other vacuum pump manufacturers, we don't shy away from special alloys. If you require 317SS, Alloy 20, Hastalloy or other special alloys, we are the vacuum pump company for you. Armstrong Vacuum Pumps are manufactured to customer specifications.
In solving individual paper mill vacuum pump problems we are typically engaged in the following activities:
- Fiberscope inspections
- Orifice testing
- Service in the Mill (bearing changes, coupling problems and complete pump service
- Pump removal and installation
- vacuum pump repairs: Armstrong Pump has an inventory of all stainless steel parts - rotors, cones, packing glands, and bodies for most Nash CL pumps and Nash 904 pumps.
Engineered Coatings and Machine, Inc. - P.O. Box 170625, Birmingham, Alabama 35217, USA
E-Mail: , Tel. , Fax
products:
ECM Incorporated is one of the leading rebuilders of Nash liquid ring vacuum pumps. We have the facilities, knowledge, and expert personnel to handle all of your Nash pump needs. From the smallest pumps all the way up to the CL-14000 pump, we are your source for quality rebuilds offering 316 Stainless Steel wear areas and ceramic coating of interior vitals for harsh usage conditions. We are pleased to stock and offer K, L, and H series Nash Pumps as well.
In addition to rebuilds, ECM offers the sale of both OEM and non-OEM parts for Nash Pumps. We maintain a large inventory of rebuilt pumps and components ready for immediate delivery. ECM also offers upgradeable pump repair kits for use in even your most hostile applications.
"liquid-ring" - Birmingham, AL 35231, USA
E-Mail: , Tel. , Fax
company profile:
Liquid ring vacuum pumps, sales of new pumps, spare parts sales, swap pumps, pump rebuilds
The Himic Company - P.O.Box 36424, Birmingham, AL 35236, USA
Steve Himic,
company profile:
Artisan Industries sales representative for Alabama, Georgia, eastern Tennessee, Florida Panhandle
VTI VACUUM TECHNOLOGY INC. - 1003 Alvin Weinberg Drive, Oak Ridge, Tennessee 37830, USA
E-Mail: , Tel. , Fax
products:
Leak Testing Systems, Calibrated Leak Standards, RGAs & Gas Analysis Systems, and Vacuum Systems & Components.
Vacuum Technology supplies a full line of vacuum hardware, turbo-molecular and mechanical vacuum pumps and custom vacuum system components including manifolds, chambers, crosses and tees.
FLEXIAL CORPORATION - 1483 Gould Drive, 38501 Cookeville, USA
E-Mail: , Tel.
Gary Cummings - Dir. Marketing & Sales
Jason Beaty - Sales Application Engineer
Products:
Edge Welded Metal Bellows
company profile:
Worldwide mfr. of edge welded bellows for aerospace, military, semiconductor, high vacuum, instrumentation, scientific, bellows accumulators, valve seals, electrical switchgear, down-hole, oceanic & submarine, industrial controls, medical, highway, reservoirs & compensators.
www.vacuum-guide.com Keywords