| Japan mechanical feedthrough manufacturers | Keywords www.vacuum-guide.com |
|
EagleBurgmann Japan Co.,Ltd. - www.ekkeagle.com
- 1-12-15, Shiba-Daimon, Minato-ku, Tokyo, 105-8587, Japan email, Tel. +81 3 3432-0188 |
products: Magnetic Fluid Vacuum Seals
Magnetic fluid seals from Eagle Industry are employed in a wide range of industrial applications including manufacturing (typically semiconductors, LCD panels, solar panels and LED devices) as well as industrial machinery, analyzers and clean robots. |
|
KYODO International Inc. - www.kyodo-inc.co.jp
- 2-10-9, Miyazaki, Miyamae-ku, Kawasaki-shi, Kanagawa-ken 216-0033, Japan email, Tel. |
products: Sales / Repair / Overhaul of Magnetic Fluid Feedthrough
Wide variety of products which apply magnetic fluidics. We correspond to various demands : from Dustproof sealing for the atmosphere to Ultra high vacuum sealing. |
|
MoreTec Co., Ltd - www.moretec-inc.com
- Dai2 Amemiya Bldg. 8F, 23-5,Higashi-Ueno 6Chome, TaiTou-Ku, Tokyo 110-0015, Japan email, Tel. +81 03-6231-7890 Moretec Group is manufacturer and worldwide supplier of vacuum feedthrough (Magnetic fluid seals)for PVD, CVD, FPD, Sputtering System, Ion Implantation, Czochralski (CZ) Growing Equipment and Vacuum Robot etc. R&D and engineering team are in Japan and production in China. |
products: Magnetic Fluid Feedthrough
Under the condition of shaft rotation, a magnetic fluid feedthrough provides a hermetic seal against both vacuum and gas. A magnetic loop consists of the magnet, poles and the shaft. Several stages of liquid O-ring are formed by the gathering of the magnetic fluid between the poles and the shaft in the presence of magnetic field. Each stage can sustain a pressure of 0.2kgf/cm2. There are normally 10 to 20 stages in the sealing part of the feedthrough. Taking advantage of the superparamagnetic and liquid properties of magnetic fluid, there is no mechanical wear, even at very high rotary speed of the shaft. The magnetic fluid feedthrough is an Ultimate Sealing Component with a long life time. |
|
Rigaku Corporation, Core Component Division - www.rigaku-mechatronics.com
- 3-9-12, Matsubara-cho, Akishima-shi, Tokyo 196-8666, Japan email, Tel. |
products: Magnetic fluid seals
Rigaku's magnetic fluid seals are offered in 12 series, with a lineup of 72 models. In terms of subcategories according to magnetic fluid types, water cooling mechanism, shaft processing types, etc., the number of product types amounts to 711. The origin of Rigaku's magnetic fluid seal units goes back to 1952 when Rigaku commercialized a rotating anode X-ray generator for the first time in the world. Although they were originally the built-in units for in-house products, Rigaku Mechatronics was established in 1989 as a manufacturer of magnetic fluid seal units based on the technologies accumulated by that time. Our products have been widely selected as a clean shaft bearing to solve various issues in the needs from customers who put the highest priority on reliability. |
top of page